We have just published a short video of the Fairino FR5-WML on a welding station. It is the arm with the longest reach in the FR series, so we wanted to show what that reach means in practice.

What you will see (3:43)

  • the arm fitted with a MIG/MAG torch and a seventh axis,
  • hand guiding and how the guiding sensitivity can be adjusted,
  • a simple program written in the Welderstal welding application: a move along the table edge, two intermediate points and a straight-line motion,
  • the program running across a table that is 2400 mm long, from a single mounting position.

FR5-WML in numbers

  • Reach: 1900 mm
  • Payload: 5 kg
  • Repeatability: ±0.1 mm
  • Axes: 6

Compared with the standard FR5 (922 mm, ±0.02 mm) you get more than twice the reach with the same payload, at the cost of repeatability. For long welds and large structures that trade-off usually makes sense. For small parts where accuracy matters, the FR5 is the better choice.

Video (Polish audio, English subtitles): https://www.youtube.com/watch?v=_HorZPXfDao

Full write-up with a comparison of FR arms: https://newwelding.pl/en/blog/fairino-fr5-wml-welding-cobot-1900-mm-reach/

Is anyone here running an FR5-WML on a table longer than 2 metres? We would be interested to hear how you mount it and whether you use a linear track for longer parts.